Technical Writing for the Terrified

Introduction

Sometimes it may be beyond a companies or individuals budget to hire a professional writer to address their technical documentation. Although in an ideal world all technical documentation should be produced by a highly trained expert, unfortunately we do not live in an ideal. In the same way that many people will attempt to repair their own home appliances, many people will attempt to write quality technical documents. Just as fiddling with a toaster can result in electrocution, attempting to write technical documents from scratch without prior advice will ultimately result in failure. As a rough rule of thumb you should always seek to employ a specialist, but if for whatever reason you can't and you are the poor unfortunate that has had documentation duties foisted on them, don't despair. This brief guide outlines some of the core skills you will need to bring to your writing, technical conventions to be aware of, software packages you can consider, and definite things to avoid. Hopefully even if you have never written a sentence in your life about anything vaguely technical you will have at the very least, a broader picture of what technical writing entails.

What is Technical Writing?

Technical writing unsurprisingly enough, refers to writing that is technical. Although this may seem like a fallacious definition, it's an important one to remember. Too many technical authors make the mistake of creating documentation that is either too technical, or too 'literary'. A good technical author should be able to adjust the balance between the two to suit the end user of the documentation. Technical writing is a lot like fresh air, pervasive and yet pretty much invisible. In the weird wired world in which we find ourselves, technical writing is everywhere. Software manuals, user guides for home appliances, instructional leaflets, emails, letters, reports, technical news reports, statistics and biographies on television sports shows all are examples of technical writing to which people are exposed to on a daily basis. If you have ever tried to program the time settings on a home video recorder and flung the manual across the room in disgust, you threw a piece of technical writing (although obviously not a very good one!).

Too many times technical literature is produced by writers with not a large enough grasp of technology, or technologists that lack an ability to write. As a prospective technical author you must tread the very delicate line of being technically knowledgeable in your specialist field(s) as well as being a 'good' writer (as opposed to 'bad' writers who can usually be found mugging sweet old ladies or something). Technical documentation is usually produced for two distinct user groups, namely expert level users, and naive users. As a technical author one of your first tasks is to sort out what audience you are writing for, which brings me deftly to:

Know thy foe

As the old cliché goes, everyone's a critic. This is particularly true of most sane people's reaction when faced with technical writing. As was highlighted in the example of the video recorder above, technical writing can be impenetrable to the end user. If this is the case, it is because whoever wrote the documentation, didn't bother to identify their audience and write to their level. It seems an obvious point to make, but one that is often overlooked, that the user of the documents your are creating, may not actually be an expert. Obviously if you are creating a document on a particular specialist product for a particular advanced user group (a good example could be auditing software for computer system administrators) then you will need to compose this is an entirely different way than if you are creating for example, a technical manual for mass market computer software aimed at the inexperienced home user. One of the first tasks you must accomplish before you even put pen to paper, of finger to keyboard, is to identify who the user of your documents will be and construct documents aimed at that particular target group(s). If you get this stage correct, it should avoid your documents being thrown across rooms in annoyance!

Planning for perfection

Once you have identified the target market for the documents you will be creating, you will need to start to plan how the documents will be organised. This process is largely dependent on what documentation is being produced, but you can follow a few rough rules of thumb. Firstly, if the documents are to support a particularly detailed product (such as a computer application) get your grubby hands on it as quickly as you can. By examining the product in detail you can formulate a plan of attack and begin to compose an organisational structure. Whilst you are exploring the product in detail, take copious notes, as doing this during the initial exploratory stages can save you time which can be absolutely vital if you are working to deadline. Even at the planning stage you must ensure there is a consistency to layout, and organisational structure for the document. Select numbering conventions, paragraph styles, and generate rough ideas for layout purposes now, and save vital time later.

Let a Draft in

Before diving headfirst into creating the documentation, draft out each section first. This will allow to reorder if the documents being created do not have a logical 'flow' without seriously having impact on the project. Many technical documents (especially for more detailed products) are made up of numerous (and in some cases practically countless) iterations. This is because the product shifts and changes over time, and one of the principal duties of a technical author is to keep abreast of these changes, and to ensure that they are all well documented. Good technical authors will always push their documents through as many drafts as humanly possible, refining on each draft, until they reach a position whereby they (and their employer) is satisfied that the documentation is timely, accurate and a true reflection of the product or process it documents.

The devil is in the detail

As already identified, technical writing is called that because it is technical in nature. Part of being technical is to be precise, and part of precision is to be as detailed as humanly possible. Even if the documents you are creating are for an advanced and technologically sophisticated user group, your documentation must focus on the details of a process, or in using a product. This can be a difficult feat to accomplish, but not if you write to your audience. Never assume that the reader knows anything about the product or process be documented, but in the case of advanced / expert users at least have the common sense to recognise the fact that they probably do not need to be told how to use the equipment they operate on a daily basis. When describing how to carry out a particular activity or task, identify each stage involved (number them if this fits the conventions of the document type you are creating) and to ensure the accuracy of what you have written test it yourself, or even better, rope in a volunteer of the same skills level as the end user.

Choose the right tool for the job

Although it is possible to create technical documents using parchment and blood, it's not advisable. Many specialist software applications exist to help you create powerful documentation, and part of your duties as a technical author, include selecting the right tool for the job. Largely this depends on the nature of the documents being produced, and the nature of their eventual distribution. If the documents can be delivered using the Internet, this is certainly an avenue to consider. To that end make use of packages such as Flash MX and Dreamweaver to achieve this goal. For integrated online help, you may wish to create raw HTML documents, or alternatively select a specialist package such as RoboHelp or similar. In the case of print based documents, you will need to select a software package powerful enough to handle what you will throw at it.

Many inexperienced technical authors instantly turn towards Microsoft Word (as it is ubiquitous in may commercial and private environments). Unless your documentation is going to be beneath 150 pages, and you know how to create templates and make macros, avoid MS Word. As any technical author will tell you it has nasty habits all it's own, and can often be an unstable package to work with. If you are creating graphics heavy documentation, you may wish to consider Quark Xpress, or choose potentially the industry leader in the field, Adobe Framemaker. Whatever software you select, you must ensure you become incredibly proficient with it, either by investing in training, or by using it day after day after day!

Communicate - that's what you are paid to do!

Many people will tell you that creating technical documentation is tedious and repetitive. These people, are wrong, and possibly morons too. Although you may find the process of creating technical documentation 'boring' (if you do you are in the wrong job!) it isn't. Creating quality technical documents is a vital stage in allowing people to adequately and correctly use technology. Although no user will approach the documentation you create in the same way as they approach a novel, you can ultimately help them achieve what they want to achieve using technology. No matter how 'dull' the process may appear to be, allowing users to achieve their goals by reading your documents should give you a rush of pride and indeed, happiness. As long as you remember the positive effects that technology can have on people's lives, when you create your documents you can communicate more effectively, as you will be happier in the communicative process. Throughout the documentation life cycle, you should seek to liaise with colleagues as often as possible (if applicable). Let them read your documents, listen to their criticisms, and adjust your documents (if you can't argue your corner!). A technical author is paid to communicate, make sure that you do, and never forget why your are communicating, and to whom, in the documents themselves.

Common Mistakes to avoid making

When creating technical documents there are a number of fatal flaws you can make. Although by no means exhaustive, this section details some of the more common mistakes new authors make, in the hopes that you will avoid making them too:

Being Patronising - Although technical documentation should be clear, it should never be patronising. You are not creating documents to be read by morons but consumers and clients. You should always write to the skills level of your audience, but no matter what technical level people are on, they are not morons. Even children get offended when patronised, don't make that mistake with someone who is paying your salary, child or otherwise.

Overuse of humour - People do not read technical documents to be entertained, they read them in the hopes of successfully completing a process, or extracting information. Unless it is relevant to the end user, avoid humour wherever possible. If you are writing a book, fine and good. If you are writing a manual, avoid humour like the plague, as more often than not users will miss the joke and just end up loathing the patronising idiot that wrote the documentation.

Inconsistency - Even at the drafting stage, you should ensure that all the elements used in your document are consistent. This applies as much to the 'tone' of the document as to the layout of it. Ensure you use consistent senses (first person, etc.) as well as page layout, pagination elements, headers and footers, and all other textual elements.

Proof read - By the end of creating a piece of technical documentation, you will probably be sick of the sight of it. That doesn't matter. What matters is what leaves your office or home, is accurate. To that end proof read the document throughout all it's drafts, and before it is distributed proof read it again, and again, and again. Never rely on spell checkers (they never work) and if you can avoid it, never rely solely on your own judgement. Get your document read by as many pairs of eyes as possible prior to distribution, after all, they could spot the one thing you have been missing throughout the creation process.

Conclusion / Shameless self promotion

Technical writing is not regardless of what you may think, an easy job. It requires expertise, patience and a very odd mixture of skills. Just like any other job, you can learn how to do it, but even that tuition will not necessarily make you any good at it. To be a good technical author, you have to be anal yet creative, focussed yet communicative, and a flexible expert. This, as you can probably imagine, is no simple task. Although you may think creating technical documents is easy, creating accurate, consistent and timely documentation to a high commercial standard is a highly challenging role. Regardless of your budget, in the long run it will provide significant ROI if you hire a specialist. After all, they will be able to do in days, what you tear your hair our attempting to accomplish in weeks if not months.

About The Author

Over the years Mike Kemp has been employed as a freelance IT journalist (working for publications such as The Register, Namesfacesplaces, Security Focus and Packetstorm), a copywriter, videogames designer, security auditor, web designer, graphic designer and IT trainer. He has worked in a variety of freelance and permanent positions for both small (e.g. two men and a dog) companies to multinational organisations throughout both the UK and Europe. When not working on various articles, books, manuals, and assorted other copy for clients, Mike can usually be found toiling on a variety of unpublished novels. He has had several of his short screenplays produced by independent production companies, and is currently working on several feature length scripts.

Mike lives mostly happily in a dreadfully un-bohemian London suburb with his long-term (and long-suffering) partner, and two addled cats. To learn more about Mike, the range of projects he has been involved in, and other assorted stuff and nonsense, please visit his personal homepage at www.clappymonkey.com.

---

Local Knowledge: Background and Historical Setting in Novels

You're writing a story set in your local city, but... Read More

The Myths Of Writing: Have You Bought Into These?

There is an image most people carry of the artist... Read More

Whats in a Name? Giving Birth to your Characters

So you've got your plot outlined, a title lined up... Read More

10 Tips To Help You Pack More Power Into Your Business Writing

1. Before you write anything down define not what you... Read More

How to Catch the Writing Bug

----------------------------------------------------------Permission is granted for the below article to forward,reprint, distribute,... Read More

Freelance Feast or Famine?

Sometimes a freelance writing career can feel very much like... Read More

Building a Character Wall

For any great novelist, defining your cast of intriguing characters... Read More

Im Just The Writer

Writers are often are greatly surprised or disappointed by how... Read More

Become an Instant Author by Playing Well with Others

You wrote a tips booklet. Maybe more than one. Oh... Read More

Become the Writer You Always Dreamed of Being

So you want to be a writer, except you don't... Read More

Getting To Know Your Characters

Interesting characters that readers care about are the most important... Read More

Dont Get Burned: Evaluating Script Writing Contests

Hundreds of writing contests tempt screenwriters with the lure of... Read More

How Three Publishing Myths Kill the Author

Agents and publishing houses have their best interests at heart,... Read More

How to Pitch a Story

Ever wonder why we refer to convincing an editor a... Read More

How You Can Find Freelance Editing Jobs

Freelance editing opportunities are out there, you just need to... Read More

Top Ten Reasons Its Great To Be A Writer

10 - You will always have a job. As long... Read More

7 Book Publicity Tips for Authors and Small Publishers

The biggest mistake authors make when trying to get free... Read More

Editorial Freelancing: 5 Must-Know Tips to Getting Your Foot in the Door

So, you want to freelance as an editor, writer, copy... Read More

Message to Online Writers: Dont Give Up On A Good Idea

The writing community is a strong one, with many new... Read More

Interview with Suspense Author Peter Abrahams

Peter Abrahams is the author of thirteen novels, including "The... Read More

Before You Write Your Book, Organize Its Parts - Part 1

If you are a serious writer who wants to publish... Read More

Sharpen Your Writing With Structure

At some point, every serious writer is forced to sit... Read More

What is Screenwriting?

Simply put, it is the art of writing scripts for... Read More

Beginnings

Just about everyone is familiar with this beginning: "In the... Read More

How To Filter Description Through Your Characters

How do you describe a scene without slowing down the... Read More

Finish Your Book Already!

I owe the completion and success of my book to... Read More

Masquerading As Novel ~ Can Author?s Work Convey Important Perceptions?

While novels do not usually attempt to convey concepts about... Read More

Should You Hire a Ghostwriter?

Have you heard the term 'ghostwriter' and wondered what they... Read More

About Writing

Here's everything I know about improving your writing, publishing it... Read More

Writing Made Them Rich #2: Charles Dickens

Charles Dickens was born in Portsea, England, in1812. His father... Read More

The Three Cs of Writing an Excellent all Purpose Headline

Since the headline is the first contact your readers have... Read More

Revising Your Manuscript: Fourteen Questions to Ask Yourself

1) Can you summarize the story in about a sentence... Read More

10 Best Writers Who Ever Lived

Compiling a list of the history's ten best writers is... Read More